CMPLTPS - CoMPare Less Than Packed Single
CMPLTPS xmm1, xmm2/m128 (S1
__m128 _mm_cmplt_ps(__m128 a, __m128 b)
For each float, if (1) < (2) set 1, else set 0, to all bits of the corresponding float of (3).
VCMPLTPS xmm1, xmm2, xmm3/m128 (V1
__m128 _mm_cmplt_ps(__m128 a, __m128 b)
For each float, if (1) < (2) set 1, else set 0, to all bits of the corresponding float of (3).
VCMPLTPS ymm1, ymm2, ymm3/m256 (V1
__m256 _mm256_cmp_ps(__m256 a, __m256 b, _CMP_LT_OS)
For each float, if (1) < (2) set 1, else set 0, to all bits of the corresponding float of (3).
VCMPLTPS k1{k2}, xmm2, xmm3/m128/m32bcst (V5+VL
__mmask8 _mm_cmp_ps_mask(__m128 a, __m128 b, _CMP_LT_OS)
__mmask8 _mm_mask_cmp_ps_mask(__mmask8 k2, __m128 a, __m128 b, _CMP_LT_OS)
For each float, if (1) < (2) set 1, else set 0, to the corresponding bit of (3).
If k2 bit is 0, the comparison is not done and the corresponding bit of (3) is set to zero. Upper bits of (3) are zero cleared.
VCMPLTPS k1{k2}, ymm2, ymm3/m256/m32bcst (V5+VL
__mmask8 _mm256_cmp_ps_mask(__m256 a, __m256 b, _CMP_LT_OS)
__mmask8 _mm256_mask_cmp_ps_mask(__mmask8 k2, __m256 a, __m256 b, _CMP_LT_OS)
For each float, if (1) < (2) set 1, else set 0, to the corresponding bit of (3).
If k2 bit is 0, the comparison is not done and the corresponding bit of (3) is set to zero. Upper bits of (3) are zero cleared.
VCMPLTPS k1{k2}, zmm2, zmm3/m512/m32bcst{sae} (V5
__mmask16 _mm512_cmp_ps_mask(__m512 a, __m512 b, _CMP_LT_OS)
__mmask16 _mm512_mask_cmp_ps_mask(__mmask16 k2, __m512 a, __m512 b, _CMP_LT_OS)
__mmask16 _mm512_cmp_round_ps_mask(__m512 a, __m512 b, _CMP_LT_OS, int sae)
__mmask16 _mm512_mask_cmp_round_ps_mask(__mmask16 k2, __m512 a, __m512 b, _CMP_LT_OS, int sae)
For each float, if (1) < (2) set 1, else set 0, to the corresponding bit of (3).
If k2 bit is 0, the comparison is not done and the corresponding bit of (3) is set to zero. Upper bits of (3) are zero cleared.
This instruction is:
Ordered - If either or both of source operands is NaN, condition unmet.
Signaling - Exception on QNaN
CMPPS/VCMPPS instrucion imm8 value = 1h
x86/x64 SIMD Instruction List
Feedback